IVI 3D Printer | Forum

Challenge Accepted Game – Week #05

Dear IVIers,

The printing results of Week #04 has been released. Please click the link and check the details.

The filament of week #05: Sparkling PLA

Please share with us the model you want IVI to print below and get the chance to win a free 3D Scanner Module.

Important reminders:

  1. There are no limits to the number of model parts but all the parts of the whole model need to be printed within 12 hours.
  2. Please don’t share models repeatedly in a single round. A picture of the model and a link to download the STL file should be included in the reply.
  3. If the shared model is not designed by you, please make sure you get the permission of the model creator to share in public. Name or page link of the creator should be included in the reply.
  4. The more likes you get for your shared model, the more chances we will print it. So please try to share as much information as possible and mingle with your fellow IVIers to get more likes.
  5. Every Wednesday on 21:00 PT, IVI team will select one from the top 3 most liked models to print. Since we were working on the last update Schedule Update [June & July], we will select one model of Week #05 to print by 21:00 PT this Thursday (1st August).
  6. When the game ends on August 31, there will be three backers whose shared models are selected, printed and the likes of the prints rank in the top 3 will win a free 3D Scanner Module each.

Rules

  1. By sharing the model with us, you grant us the right to use it. IVI will not accept any complaints about the use of the shared model.
  2. IVI reserves the right to disqualify participants if there is any violation of the rules and regulations.
  3. IVI reserves the right to cancel or modify this Game at any time.
  4. Due to the R&D development time & production lead time, the shipping date of the 3D Scanner Module will be announced at a later time.

Looking forward to seeing your models.

There is a few things that look good in blue that must be blue.

Superman, the man of blue.

1 Like

Kinda want to remember the childhood with the Blue Eyed white dragon from Yu-Gi-Oh!

There is a “Blueeyeswhole” file in the package so feel free to use this one to print:

Full Henry Cavil Superman

1 Like

The OG Blue Dragon from D&D

1 Like

Blue Spirit Mask from Avatar

1 Like

Gyarados from Pokemon! :smiley:

God of the Sea - Poseidon!

Fancy Space Ship!

1 Like

Avatar the other one:

why are all the challenge PLA base?

I would like to see more difficult filament like PETG or ABS challenge, I want to see how much PETG stringing with the IVI printer, I want to see the shrinkage rate of ABS with the enclosure…PLA is not much of a challenge as they are the easiest filament to print.

1 Like

Evangelion Unit 01! Would look sick with this blue.

Or the lizard King!

a Sparkling Blue pony would look cute

3 Likes

cute dragon

2 Likes

My suggestion this time is a working ocarina with some engraving to test out details.
Designed by FSLaser

Ocarina1
Ocarina%202

image

Crystal Cluster in sparkling blue! Can you image the model printed with this filament? It would be magic and supergalactic!!

1 Like

image

BAD GNOME in sparkling blue is perfect!